PC Hammer Crusher
January 7, 2019
Gyratory Crushers
January 7, 2019

PH Ring Hammer Crusher

Category:
Description

PH Ring Hammer Crusher

In order to meet the requirements for crushing coal in the thermal power plant, our company has been introduced of the technology of ring hammer crusher from Pennsylvania Crusher Company in the United States, and with which we practice our rich experience in designing and manufacturing hammer crusher and counter-impact crusher to research and develop the two series of light type and heavy type of 10 specifications ring hammer crusher whose design and manufacture are completely localized.

This kind of crusher has not only high-speed rotating ring hammer hitting materials and collision between materials but also the function of extrusion and grinding. The crusher can crush material fed into the more uniform particles under the effect of the above functions and also has a strong discharging capacity.

To compare with hammer crusher and counter-impact crusher, ring hammer crusher has the advantages of high efficiency, energy saving, stable operation, low noise and small blowing volume, and which is widely used in crushing coal in thermal power plants.

The ring-hammer crusher is mainly composed of frame, rotor, grate plate, synchronous regulator, upper-cover hydraulic opening device and other parts. The crusher is directly started by the elastic steel plate coupling connecting with the motor.

The frame part is mainly composed of the lower frame, the upper cover and the bypass groove. The upper cover can be opened by hydraulic pressure to repair and replace the fragile parts and equipped with a non-fragmentable materials collection cabinet used for collecting non-fragmentable materials under the force of the centrifugal force of the ring hammer, which protects not only the crusher itself but also the next step working machine.

The bypass groove can be arranged to directly deliver fine coal that is not crushed to the next working procedure without passing through the crusher thus it can save power consumption. If the system is not required the bypass groove it can not be selected.

Installation of this crusher can be directed to left or right. To face the front of the crusher i.e. feeding groove or bypass groove location motor is installed in the right side the crusher is right, otherwise it is left.

Nameplate and instructions

PH Series Parameter

Type

Rotor DN
mm

Rotor Length
mm

Feeding Grain (Max)
mm

Output Grain mm

Output
t/h

Motor

Quantity of ring hammer

Outline
mm

Model

Rate
kw

Voltage
V

PHQ—B1111

Ф1100

1180

≤300

≤20

400

Y450—8

250

3000
6000

Tooth ring 36

5079X3284X2280

PHQ—B1116

1676

600

280

Tooth ring 52

5579X3384X2280

PHQ—B1220

Ф1226

2050

800

Y500—8

450

Tooth ring 52

5841X3754X2404

PHQ—B1226

2600

1000

560

Tooth ring 68

6485X3754X2404

PHQ—B1228

2882

1200

630

Tooth ring 76

6813X3754X2404

PHZ—B1213

Ф1200

1388

400

Y450—8

280

Tooth ring 26

5272X3675X2345

PHZ—B1218

1804

600

315

Tooth ring 34

5688X3675X2345

PHZ1322

Ф1370

2200

≤400

≤25

800

Y500—10

400

Teeth 18, light 16,total 34

6233X3295X2505

PHZ1326

2680

1000

450

Teeth 22, light 20,total 42

6713X3295X2505

PHZ1331

3160

1200

560

Teeth 26, light 24,total 50

7193X3295X2505

Note: 1.The diameter of rotor is meant of the acting track of ring hammer outer edge when the rotor is working; 2.The output is defined under the compressive strength of material crushed is not more than 12MPa, moisture of surface is less than 90%, bulk density is 0.8~1 t/m3 and qualified grain is not less than 97%.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PH Ring Hammer Crusher”

Your email address will not be published. Required fields are marked *